Labocosmetica Vitreo Glass Polish 250ml
Subcribe to back in stock notification
Free Shipping
Free standard shipping on orders over R1000 (<15Kg)
Labocosmetica VITREO Glass Polish 250ml | Cerium Oxide Glass Polishing Compound
Professional Glass Polish for Scratches, Marks, Contamination & Glass Restoration
Restore clarity to automotive glass with Labocosmetica VITREO Glass Polish 250ml — a specialised glass polishing compound designed to remove marks, scratches, mineral contamination and imperfections from glass surfaces.
VITREO features a high-purity abrasive blend containing rare earth elements and cerium oxide, carefully formulated to provide a hard, consistent and controlled cutting action.
Designed specifically for glass correction, VITREO is suitable for restoring windscreens, windows, mirrors and glass headlights, including the glass headlights found on many classic and vintage vehicles.
It can be used as a correction polish to address glass imperfections or as a glass decontamination treatment before applying an anti-rain sealant or glass coating such as Nasiol Glasshield.
Why Choose Labocosmetica VITREO?
-
Dedicated Glass Polishing Compound – Specifically engineered for glass correction.
-
Cerium Oxide Formula – Uses high-purity cerium oxide and rare earth abrasives.
-
Removes Glass Scratches – Designed to correct suitable marks and scratches in glass.
-
Removes Mineral Contamination – Helps tackle stubborn water spots and limestone deposits.
-
Restores Glass Clarity – Helps improve the appearance and transparency of treated glass.
-
Consistent Cutting Action – Balanced abrasive formulation provides a regular and controlled cut.
-
Suitable for All Types of Glass – Ideal for automotive glass applications.
-
Windscreen & Window Restoration – Suitable for automotive windows and windscreens.
-
Mirror Restoration – Can be used to restore suitable glass mirrors.
-
Glass Headlight Restoration – Suitable for glass headlights, including vintage applications.
-
Coating Preparation – Can prepare glass for subsequent anti-rain sealants and glass coatings.
-
Hand or Machine Application – Suitable for manual and machine polishing depending on the task.
Advanced Cerium Oxide Glass Correction
Glass requires a specialised abrasive system to effectively correct surface imperfections.
Labocosmetica VITREO uses a high-purity abrasive mixture containing cerium oxide and rare earth elements, providing the hardness and controlled cutting characteristics required for glass polishing.
The balanced formulation is designed to maintain a constant and regular cut, making VITREO suitable for controlled glass restoration work.
Remove Marks, Scratches & Glass Contamination
VITREO is designed to address a variety of common glass imperfections and contamination, including:
-
Suitable surface scratches
-
Marks
-
Water spots
-
Limestone deposits
-
Mineral contamination
-
Embedded contamination
-
Residue from previous glass coatings
-
General glass imperfections
The level of correction achieved will depend on the depth and nature of the defect, the glass itself, pad selection and polishing technique.
Restore Windscreens, Windows & Mirrors
VITREO is suitable for restoring the appearance of a wide range of automotive glass surfaces.
Use it on:
-
Windscreens
-
Side windows
-
Rear windows
-
Glass mirrors
-
Automotive glass
-
Glass headlights
It is particularly useful for classic and vintage vehicles fitted with glass headlights, where restoration rather than replacement may be desirable.
Prepare Glass for Ceramic & Anti-Rain Protection
VITREO isn't only a correction product.
It can also be used as a glass preparation polish before applying a glass coating or anti-rain sealant.
By removing contamination and previous surface residues, VITREO helps prepare the glass for subsequent protection.
This makes it an excellent preparation step before products such as glass water-repellent coatings and anti-rain sealants.
Remove Previous Glass Coatings
VITREO can also be used to help remove residues from previously applied glass coatings.
This makes it particularly useful when preparing glass for a fresh application of protection, where old product residue or contamination needs to be removed first.
Professional Glass Polishing Technique
Glass polishing requires careful heat management.
For scratch correction, Labocosmetica recommends working on small areas of approximately 20cm × 20cm at a time.
Keeping the working area controlled allows the operator to monitor the surface temperature and correction progress more effectively.
During machine polishing, a small amount of water can be sprayed onto the working area to assist the polishing process and help prevent excessive heat build-up.
How To Use Labocosmetica VITREO Glass Polish
Step 1 – Thoroughly Clean the Glass
Clean and decontaminate the glass before polishing.
Ensure the surface is free from loose dirt and contamination that could interfere with the polishing process.
Step 2 – Protect Sensitive Areas
Mask sensitive areas surrounding the glass with suitable automotive masking tape.
Pay particular attention to:
-
Rubber mouldings
-
Plastics
-
Fabric surfaces
-
Other sensitive trim
This helps prevent accidental contamination from the polishing compound.
Step 3 – Work a Small Area
Divide the glass into manageable sections.
For scratch correction, work an area of approximately 20cm × 20cm at a time.
Step 4 – Prepare the Pad
Dampen the recommended thin felt polishing pad and apply VITREO.
Distribute the product evenly across the working area.
For best results, MaxShine Glass Polishing Pads are recommended for glass polishing applications.
Step 5 – Polish Carefully
For machine polishing, a rotary polisher at a maximum of 1000 RPM is recommended for scratch-removal applications.
Use a suitable soft pad to help reduce vibration from the felt polishing pad.
Avoid excessive pressure.
Step 6 – Control Heat
During polishing, periodically spray a small amount of water onto the working area.
This helps the product work effectively while reducing excessive heat build-up.
Do not allow the glass to become excessively hot.
Step 7 – Limit Consecutive Passes
Do not perform more than two consecutive polishing steps on the same working area.
If additional correction is required, move to another section and allow the previously treated area to cool completely.
Only return to the area once the glass has cooled.
Step 8 – Remove Residue
After polishing, remove product residue using a clean, soft and slightly damp microfibre towel.
Because the glass may still be warm, using a damp microfibre helps reduce the risk of creating streaks, stains or halos.
Step 9 – Inspect & Repeat if Required
Inspect the treated area under suitable lighting.
If additional correction is required, allow the surface to cool completely before performing another controlled polishing cycle.
Removing Limestone & Mineral Contamination
For water spots, limestone and other surface contamination, VITREO can also be used as a glass preparation treatment.
A random orbital polisher or suitable microfibre pad can be used depending on the application.
For manual polishing, work carefully and evenly across the affected area.
Once the glass is clean and properly prepared, it can proceed to the application of a suitable anti-rain sealant or glass coating.
Recommended Polishing Equipment
For professional glass correction, pair VITREO with suitable glass polishing equipment.
Recommended:
-
MaxShine Glass Polishing Pads
-
Suitable felt glass polishing pad
-
Rotary polisher for scratch correction
-
Random orbital polisher for decontamination/polishing
-
Clean microfibre towels
-
Water for heat management
-
Automotive masking tape
Important Application Considerations
Glass polishing requires controlled technique.
For best results:
-
Work on small areas.
-
Avoid excessive pressure.
-
Monitor surface temperature.
-
Use water to assist with heat management.
-
Do not allow the glass to become excessively hot.
-
Do not perform more than two consecutive steps on one area.
-
Allow the glass to cool completely before further correction.
-
Always inspect the result before continuing.
Product Specifications
Product: Labocosmetica VITREO Glass Polish
Size: 250ml
Product Type: Glass polishing compound / glass cut compound
Key Abrasives: Cerium oxide and rare earth elements
Primary Uses: Glass scratch correction, polishing and decontamination
Suitable Surfaces: Automotive glass, windscreens, windows, mirrors and glass headlights
Application: Hand or machine
Recommended Rotary Speed: Maximum 1000 RPM for scratch-removal applications
Recommended Working Area: Approximately 20cm × 20cm
Recommended Pads: MaxShine Glass Polishing Pads / suitable felt pad
Ideal For
-
Professional detailers
-
Glass restoration specialists
-
Paint correction specialists
-
Automotive enthusiasts
-
Windscreen restoration
-
Glass window restoration
-
Mirror restoration
-
Classic and vintage vehicle restoration
-
Glass headlight restoration
-
Water spot removal
-
Limestone removal
-
Glass decontamination
-
Glass coating preparation
-
Anti-rain coating preparation
Restore the Glass. Restore the Clarity.
Don't replace glass simply because it has become marked, contaminated or dull.
Labocosmetica VITREO Glass Polish 250ml provides professional glass correction performance using a high-purity cerium oxide and rare earth abrasive system engineered for a consistent, controlled cut.
From windscreens and windows to mirrors and vintage glass headlights, VITREO gives professional detailers the specialised polishing performance needed to restore and prepare automotive glass.
Correct. Restore. Prepare. Protect.
Choose Labocosmetica VITREO Glass Polish 250ml for professional glass polishing and restoration.